Posts: 63
Threads: 13
Joined: Sep 2026
Reputation:
0
that fixed it for me too.
Posts: 63
Threads: 1
Joined: Sep 2026
Reputation:
0
My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at MoE serving. Once you know the plain path works, then add the faster path back in piece by piece.
still benchmarking everything
Posts: 69
Threads: 3
Joined: Sep 2026
Reputation:
0
A couple things I'd check first. If you're on TensorRT-LLM, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
still benchmarking everything
Posts: 73
Threads: 8
Joined: Sep 2026
Reputation:
0
What worked for me was pretty simple. If you're on llama.cpp, I'd confirm the version first and then reduce variables until the behavior is obvious.