Posts: 55
Threads: 6
Joined: Sep 2026
Reputation:
0
Spent some time on this today and wanted to compare notes.
I'm comparing two approaches here: keep it simple on 4090, or squeeze more out of the stack and deal with the complexity.
Trying to avoid rebuilding the whole thing twice.
I care more about stability than squeezing the last possible tokens/sec out of it.
Posts: 184
Threads: 23
Joined: Sep 2026
Reputation:
0
Need a little more detail here. Are you testing this on 7900 XTX or something else?
Mostly CUDA, sometimes wrong, usually measured
Posts: 112
Threads: 12
Joined: Sep 2026
Reputation:
0
My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at workstation thermals. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
context windows are not a product strategy
Posts: 123
Threads: 18
Joined: Sep 2026
Reputation:
0
Quote:My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at workstation thermals. A lot o
Thanks, that helps. I don't think your conclusion is far off.
post logs or it didn't happen
Posts: 35
Threads: 5
Joined: Sep 2026
Reputation:
0
Interesting, I hadn't tried that. I ended up in about the same place using LM Studio.
Posts: 30
Threads: 0
Joined: Sep 2026
Reputation:
0
I'd approach it in a boring order. Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at workstation thermals.
mostly local
Posts: 80
Threads: 11
Joined: Aug 2026
Reputation:
0
Maybe, but I had the opposite result. I wouldn't optimize around that first. On my side the bigger swing came from the runtime and not the model. Worth testing the simpler explanation before adopting the more interesting one.
Posts: 74
Threads: 9
Joined: Sep 2026
Reputation:
0
I'd approach it in a boring order. On 7900 XTX, the easiest win is often to back off the aggressive settings and see whether the problem survives.
learning in public
Posts: 40
Threads: 3
Joined: Sep 2026
Reputation:
0
I tested this tonight. On 7900 XTX with LM Studio, I saw basically the same behavior. The surprise was that memory pressure showed up before throughput collapsed.
Apple Silicon • MLX mostly