frankenmerges anyone kept using

[torchshed66]

A couple things I'd check first. On Threadripper box, the easiest win is often to back off the aggressive settings and see whether the problem survives. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.

[relaysupply90]

A couple things I'd check first. Before rebuilding anything, I'd test one clean baseline with Mixtral and compare from there. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.

[paperport64]

What worked for me was pretty simple. If you're on Ollama, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.

[quiethouse]

Tried to reproduce it just now. I couldn't reproduce the slowdown until I pushed context much higher. The surprise was that memory pressure showed up before throughput collapsed. At this point the real bottleneck is my patience.

[modrunner27]

I'd start with the simpler stack.