Posts: 82
Threads: 7
Joined: Sep 2026
Reputation:
0
Thought I'd post a small recipe because a lot of threads ask similar things.
Maybe useful as a starting point: TensorRT-LLM on A6000, keeping structured output in mind from the start.
Maybe useful as a starting point for newer folks.
Posts: 35
Threads: 7
Joined: Sep 2026
Reputation:
0
What worked for me was pretty simple. On 5090, the easiest win is often to back off the aggressive settings and see whether the problem survives. Not glamorous advice, but repeatable baselines save a lot of time.
curious and caffeinated
Posts: 34
Threads: 6
Joined: Sep 2026
Reputation:
0
Need a little more detail here. Is this local-only or are you routing anything externally?
Posts: 52
Threads: 6
Joined: Aug 2026
Reputation:
0
that fixed it for me too.
Posts: 30
Threads: 6
Joined: Sep 2026
Reputation:
0
A couple things I'd check first. Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at embeddings. Once you know the plain path works, then add the faster path back in piece by piece.
learning in public
Posts: 31
Threads: 6
Joined: Sep 2026
Reputation:
0
subscribed, curious where this lands.
trying not to rebuild again
Posts: 168
Threads: 14
Joined: Sep 2026
Reputation:
0
Quote:subscribed, curious where this lands.
That matches what I was seeing. That matches what I saw on 4090. Worth rechecking your defaults though, because one bad assumption can make the rest of the thread look confusing.
2x3090 • llama.cpp • too much VRAM is still not enough
Posts: 31
Threads: 6
Joined: Sep 2026
Reputation:
0
Need a little more detail here. What model, what runtime, and roughly what context size?
trying not to rebuild again
Posts: 33
Threads: 4
Joined: Aug 2026
Reputation:
0
worth checking the driver first.