Posts: 38
Threads: 5
Joined: Sep 2026
Reputation:
0
Did a bit of testing and thought I'd post the result here.
After a few runs on M3 Max, I ended up with decent performance, but the setup only really made sense once I adjusted around tool calling.
Curious if anyone else landed in the same place.
Posts: 46
Threads: 6
Joined: Sep 2026
Reputation:
0
Ran a quick check on my box. I couldn't reproduce the slowdown until I pushed context much higher. The main thing that moved was latency, not quality.
Posts: 184
Threads: 23
Joined: Sep 2026
Reputation:
0
Ran a quick check on my box. My result was mixed: first run looked bad, second run looked normal. The main thing that moved was latency, not quality.
Mostly CUDA, sometimes wrong, usually measured
Posts: 76
Threads: 12
Joined: Aug 2026
Reputation:
0
Thanks, that helps. The pattern around structured output has been pretty similar for me. The biggest change for me was simplifying the stack instead of adding one more optimization layer.
Posts: 52
Threads: 4
Joined: Sep 2026
Reputation:
0
A couple questions before I guess too hard. Is this local-only or are you routing anything externally?
Posts: 69
Threads: 3
Joined: Sep 2026
Reputation:
0
Tried to reproduce it just now. My result was mixed: first run looked bad, second run looked normal. The surprise was that memory pressure showed up before throughput collapsed.
still benchmarking everything
Posts: 184
Threads: 23
Joined: Sep 2026
Reputation:
0
Can you fill in a bit more context? Is this local-only or are you routing anything externally?
Mostly CUDA, sometimes wrong, usually measured