+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: Miscellaneous Discussion (https://www.datasculpting.ai/inference/forumdisplay.php?fid=24)
+--- Forum: News & Industry (https://www.datasculpting.ai/inference/forumdisplay.php?fid=26)
+--- Thread: driver/framework news roundup (/showthread.php?tid=817)
Pages:
1
2
driver/framework news roundup - nanogarden - 10-06-2026
This keeps coming up in conversation so I figured I'd start a thread.
The more I work with local setups, the more it seems like reranking decides everything downstream.
Curious whether that lines up with what other people are seeing.
Re: driver/framework news roundup - audiopoint18 - 10-07-2026
Not sure I agree there. I've seen people blame tail latency when the real issue was much more mundane. Could be a workload difference, but I wouldn't generalize too fast from one setup.
Re: driver/framework news roundup - phaseshed - 10-08-2026
Appreciate the detail. I don't think your conclusion is far off.
Re: driver/framework news roundup - nanogarden - 10-08-2026
Good point. That matches what I saw on dual 3090.
Re: driver/framework news roundup - mangowire - 10-09-2026
I'd approach it in a boring order. On 5090, the easiest win is often to back off the aggressive settings and see whether the problem survives.
Re: driver/framework news roundup - audiopoint18 - 10-09-2026
A couple things I'd check first. If you're on LM Studio, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: driver/framework news roundup - amberrunner - 10-09-2026
Quote:A couple things I'd check first. If you're on LM Studio, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot
I'd approach it in a boring order. On B200, the easiest win is often to back off the aggressive settings and see whether the problem survives. Not glamorous advice, but repeatable baselines save a lot of time.
If you post your exact settings, people here can probably narrow it down pretty fast.
Re: driver/framework news roundup - fastlab - 10-09-2026
My first guess would be this: Before rebuilding anything, I'd test one clean baseline with Llama and compare from there. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: driver/framework news roundup - mangowire - 10-09-2026
That matches what I was seeing. I don't think your conclusion is far off.
Re: driver/framework news roundup - nanogarden - 10-10-2026
Interesting, I hadn't tried that. I ended up in about the same place using Ollama.