+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: Miscellaneous Discussion (https://www.datasculpting.ai/inference/forumdisplay.php?fid=24)
+--- Forum: News & Industry (https://www.datasculpting.ai/inference/forumdisplay.php?fid=26)
+--- Thread: driver/framework news roundup (/showthread.php?tid=160)
driver/framework news roundup - bytestack - 09-07-2026
Spent some time on this today and wanted to compare notes.
I've gone back and forth between llama.cpp and LM Studio for Mixtral. The interesting difference for me has been consumer GPUs.
Interested in tradeoffs more than fan loyalty.
Re: driver/framework news roundup - dockriver - 09-07-2026
Tried to reproduce it just now. I couldn't reproduce the slowdown until I pushed context much higher. The surprise was that memory pressure showed up before throughput collapsed.
Re: driver/framework news roundup - modbench - 09-07-2026
Tried to reproduce it just now. I couldn't reproduce the slowdown until I pushed context much higher. The main thing that moved was latency, not quality.
Re: driver/framework news roundup - routeline23 - 09-08-2026
Need a little more detail here. Do you see the same thing with a smaller batch or shorter prompt?
Re: driver/framework news roundup - bytestack - 09-08-2026
Quote:Need a little more detail here. Do you see the same thing with a smaller batch or shorter prompt?
My first guess would be this: If you're on SGLang, I'd confirm the version first and then reduce variables until the behavior is obvious.
Re: driver/framework news roundup - deepseeked - 09-08-2026
Need a little more detail here. Do you see the same thing with a smaller batch or shorter prompt?
Re: driver/framework news roundup - routearch - 09-09-2026
I'd start with the simpler stack.
Re: driver/framework news roundup - thetashed24 - 09-09-2026
Quote:I'd start with the simpler stack.
What worked for me was pretty simple. Before rebuilding anything, I'd test one clean baseline with DeepSeek and compare from there. Not glamorous advice, but repeatable baselines save a lot of time.
Re: driver/framework news roundup - routecraft - 09-10-2026
What worked for me was pretty simple. Before rebuilding anything, I'd test one clean baseline with FLUX and compare from there. Not glamorous advice, but repeatable baselines save a lot of time.
Re: driver/framework news roundup - thetashed24 - 09-10-2026
Quote:What worked for me was pretty simple. Before rebuilding anything, I'd test one clean baseline with FLUX and compare from there. Not glamorous advice,
My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at tail latency. Not glamorous advice, but repeatable baselines save a lot of time.