+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: RAG & Knowledge Systems (https://www.datasculpting.ai/inference/forumdisplay.php?fid=14)
+--- Forum: Vector Databases (https://www.datasculpting.ai/inference/forumdisplay.php?fid=60)
+--- Thread: Help with Vector Databases (/showthread.php?tid=898)
Pages:
1
2
Re: Help with Vector Databases - fastfield4 - 10-12-2026
What worked for me was pretty simple. On M3 Max, the easiest win is often to back off the aggressive settings and see whether the problem survives. Once you know the plain path works, then add the faster path back in piece by piece.
If you post your exact settings, people here can probably narrow it down pretty fast.
Re: Help with Vector Databases - relayforge - 10-13-2026
A couple questions before I guess too hard. Do you see the same thing with a smaller batch or shorter prompt?
Re: Help with Vector Databases - emberquill - 10-13-2026
A couple things I'd check first. Before rebuilding anything, I'd test one clean baseline with Mistral and compare from there.
Re: Help with Vector Databases - orbitbench6 - 10-15-2026
Quote:A couple things I'd check first. Before rebuilding anything, I'd test one clean baseline with Mistral and compare from there.
My first guess would be this: Before rebuilding anything, I'd test one clean baseline with Kimi and compare from there. Once you know the plain path works, then add the faster path back in piece by piece.