+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: Harnesses, Agents & Orchestration (https://www.datasculpting.ai/inference/forumdisplay.php?fid=11)
+--- Forum: MCP / APIs / Tool Calling (https://www.datasculpting.ai/inference/forumdisplay.php?fid=46)
+--- Thread: frankenmerges anyone kept using (/showthread.php?tid=591)
Pages:
1
2
Re: frankenmerges anyone kept using - torchshed66 - 10-07-2026
A couple things I'd check first. On Threadripper box, the easiest win is often to back off the aggressive settings and see whether the problem survives. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: frankenmerges anyone kept using - relaysupply90 - 10-07-2026
A couple things I'd check first. Before rebuilding anything, I'd test one clean baseline with Mixtral and compare from there. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: frankenmerges anyone kept using - paperport64 - 10-08-2026
What worked for me was pretty simple. If you're on Ollama, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: frankenmerges anyone kept using - quiethouse - 10-09-2026
Tried to reproduce it just now. I couldn't reproduce the slowdown until I pushed context much higher. The surprise was that memory pressure showed up before throughput collapsed. At this point the real bottleneck is my patience.
Re: frankenmerges anyone kept using - modrunner27 - 10-10-2026
I'd start with the simpler stack.