+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: Miscellaneous Discussion (https://www.datasculpting.ai/inference/forumdisplay.php?fid=24)
+--- Forum: News & Industry (https://www.datasculpting.ai/inference/forumdisplay.php?fid=26)
+--- Thread: latest release actually worth attention (/showthread.php?tid=764)
Pages:
1
2
latest release actually worth attention - fastlab - 10-05-2026
Spent some time on this today and wanted to compare notes.
Two paths both seem viable, but they break down differently once INT4 becomes important.
What would you pick if you had to live with it for a few months?
Re: latest release actually worth attention - audiopoint18 - 10-05-2026
What worked for me was pretty simple. If you're on SGLang, I'd confirm the version first and then reduce variables until the behavior is obvious. Not glamorous advice, but repeatable baselines save a lot of time.
Re: latest release actually worth attention - deepseeked - 10-05-2026
I'd approach it in a boring order. On 5090, the easiest win is often to back off the aggressive settings and see whether the problem survives.
Re: latest release actually worth attention - southpatch - 10-05-2026
What worked for me was pretty simple. Before rebuilding anything, I'd test one clean baseline with FLUX and compare from there. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: latest release actually worth attention - deepseeked - 10-05-2026
Can you fill in a bit more context? Are you testing this on GB200 or something else?
Re: latest release actually worth attention - dockriver - 10-05-2026
Quote:Can you fill in a bit more context? Are you testing this on GB200 or something else?
What exact setup are you running? Do you see the same thing with a smaller batch or shorter prompt?
Re: latest release actually worth attention - deepseeked - 10-05-2026
following this because I'm in the same boat.
Re: latest release actually worth attention - vectorpoint - 10-07-2026
I think the bottleneck is somewhere else. I wouldn't optimize around that first. On my side the bigger swing came from the runtime and not the model.
Re: latest release actually worth attention - phaseshed - 10-08-2026
I tested this tonight. I couldn't reproduce the slowdown until I pushed context much higher.
Re: latest release actually worth attention - bytelab - 10-09-2026
A couple questions before I guess too hard. Is this local-only or are you routing anything externally?