+- Inference (https://www.datasculpting.ai/inference)
+-- Forum: Miscellaneous Discussion (https://www.datasculpting.ai/inference/forumdisplay.php?fid=24)
+--- Forum: News & Industry (https://www.datasculpting.ai/inference/forumdisplay.php?fid=26)
+--- Thread: driver/framework news roundup: setup advice (/showthread.php?tid=388)
Pages:
1
2
driver/framework news roundup: setup advice - amberrunner - 09-21-2026
Posting this in case it saves someone else a little time.
If you were starting from scratch today for this use case, what would you choose first and what would you ignore?
Would rather learn from your scars than collect my own all at once.
If I had to summarize the lesson so far, it would be that clean setup and observability beat clever guesses.
Re: driver/framework news roundup: setup advice - deepseeked - 09-21-2026
Ran a quick check on my box. The issue went away once I changed one setting and restarted the stack cleanly.
Re: driver/framework news roundup: setup advice - routearch - 09-21-2026
My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at router policy. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: driver/framework news roundup: setup advice - phaseshed - 09-21-2026
That matches what I was seeing. I don't think your conclusion is far off.
Re: driver/framework news roundup: setup advice - fastlab - 09-21-2026
same here on my side.
Re: driver/framework news roundup: setup advice - mangovault67 - 09-21-2026
My first guess would be this: Start by verifying the driver/runtime combo, then test with a smaller prompt, then look at token cost. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: driver/framework news roundup: setup advice - turboarch95 - 09-21-2026
A couple things I'd check first. If you're on vLLM, I'd confirm the version first and then reduce variables until the behavior is obvious. Not glamorous advice, but repeatable baselines save a lot of time.
Re: driver/framework news roundup: setup advice - deepseeked - 09-21-2026
Did a small comparison this afternoon. I couldn't reproduce the slowdown until I pushed context much higher.
Re: driver/framework news roundup: setup advice - southpatch - 09-23-2026
My first guess would be this: If you're on SGLang, I'd confirm the version first and then reduce variables until the behavior is obvious. A lot of these threads end up being one bad config plus a pile of conclusions drawn from it.
Re: driver/framework news roundup: setup advice - bytestack - 09-23-2026
That matches what I was seeing. I ended up in about the same place using Ollama.